Dowell PIEZOART, User Manual

Page: 14 / 24

OPERATION PROCESS
■ Before Operation
1. Turn on the main switch.
- Wait until the image below shows up on the screen.
- Replace the ultrasonic tip immediately when it is broken, bent, or worn out. If it is not replaced,
it may cause an injury or less efficiency during the surgery.
- Ultrasonic tips may break when you use tips that are not compatible or when it is used excessively.
- Before any surgery, install the ultrasonic tip and use the Clean/Ready function to check
if the irrigation pump is working correctly.
- By pressing button or foot controller will lead to the ne xt s creen.
2. Place the piezo handpiece where it can test spraying then push the button in order to remove
air inside of the irrigation tube.
2. Operate a surgery by pressing foot pedal from foot controller.
■ Post –Operation
1. Clean the product.
Refer to the instruction manual’s ‘Maintenance of the Product’.
2. Use torque wrench to disassemble the ultrasonic tip by rotating to counter-clockwise.
3. Sterilize the product.
Refer to the instruction manual’s ‘Maintenance of the Product’.
4. Keep the product in a hygienic place.
- It is most convenient to save programs to program settings for easier operation.
- Please use methods below to save program settings.
- When the ultrasonic tip touches an object before it runs, it may cause an error.
Please run ultrasonic tips first then start surgical procedure.
■ During Operation
1. Adjust personal settings with the , , buttons for individual surgeries.
* Please refer the piezo tip reference guide for the manufacturer's setting recommendations.
13