Dowell PIEZOART, User Manual

Page: 4 / 24

3
● Please pay attention when using to consider the patient’s safety most importantly.
● Check the condition of the product before use.
● Stop using and inspect the product when an abnormal sign occurs such as calescence, vibration or noise before
or during operation.
● Please contact manufacturer if problem cannot be solved.
● For safety, prepare extra consumables before using.
● Please sterilize and lubricate the piezo handpiece right after use. Otherwise, it could be damaged due to
coagulation of blood inside the product.
● The control box and foot ontroller are not steam cleaning or sterilization part.
● The input power is available at AC 100-120V.
(Check input voltage before connecting the AC power.)
● Dispose the irrigation tube as a medical waste after use.
● Contact manufacturer if an incorrect display appears on the screen.
● Do not drop or mishandle the product.
● Do not damage the irrigation tube, as it will not work properly when the tube is broken or dislodges.
● The product is designed to be used indoors; do not use outdoors.
● Do not use the product in a humid or dusty environment.
● Use only regulated products and consumables by the manufacturer. Otherwise, there could be a risk of an accident or failure.
● Replace the cords immediately when it is worn-out or damaged to prevent electric shock to the user or patient.
● Manufacturer may change specification and design of this product in order to improve the quality.
● User has responsibility to operate and maintain this product.
● This product is not Sterilized by manufacturer or distributor. Please make sure to sterilize before operating. (User sterilization)
● US Federal law restricts this device to only to a dentist.
● Do not sterilize with different methods other than moist heat sterilization. It may cause damage to the product
USER GUIDELINES
CAUTION
● Do not drop or damage the piezo handpiece. In case of malfunctioning, , dropping or falling in water,
do not use it and contact the manufacturer.
● Do not damage or drop the LCD part of the control box.
● The product needs special precautions regarding EMC (Electromagnetic Compatibility)
● Portable and mobile Radio Frequency communications equipment can affect the product.
Do not use Radio Frequency equipment near for the product.
● The system may present a possibility of malfunction when used in the presence of an electromagnetic
interference wave. Do not install the system in the vicinity of the device which emits magnetic waves.
Turn off the power switch of the Control box when an ultrasonic oscillation device or an electrode knife
is located in the vicinity where is its used.
● For safety, install the control box in a place where the power cord can be easily removed.
(It is possible to disconnect the control box from the power source by removing the power cord.)
WARNING