28
Remote Operation
6.5.4 SYST:TCPPORT?
Syntax
SYST:TCPport?
Description
This command will return the TCP port that is enabled for the Mini-Matrix.
10 = The default TCP port.
Power on behavior
Keeps last value
*RST effect
None
Possible error codes
4
6.5.5 SYST:TCPPORT x
Syntax
SYST:TCPport x
Description
This command will set the TCP port of the Mini-Matrix to the desired value. It
is allowed to be a value from 0 to 65535.
The default TCP port is 10.
Note: The Mini-Matrix must be power cycled after changing the TCP
port number for it to be implemented. See section 3.1.3 to power cycle
the Mini-Matrix safely.
Power on behavior
Keeps last value.
*RST effect
None
Possible error codes
4