7. Install the Cable Gland. Use a 3/4" punch to open the knockout on the top of the terminal. Make sure
the rubber seal is under the top nut and is tight enough to keep moisture out of the terminal enclosure.
2.2.3 Cable Routing
The Antenna Cable can be attached to the outside of the pole or put through the inside of the pole.
2.2.3.1 Cable Routing Outside the Pole
As an alternative the cable routing can go outside the pole.
l
Use cable ties at regular intervals to attach the cable to the outside of the pole.
Installation Manual - Revision: 0 - DRAFT | Dover Fueling Solutions
14
