Douwe Egberts Cafitesse 300 Next Generation Operator'S Manual Download Page 10

Page: 10 / 48

Cleaning.the.dispenser

Clean the dispenser regularly

Clean the surface around the

dispenser.

Wash your hands before touching

the dispenser or a product pack.

Clean the dispenser according

to the instructions in the operator

manual (see chapter „Cleaning the

dispenser“).

During cleaning, check the „Best

before“ and „Expiry“ dates on the

product pack in the dispenser. If

the „Best before“ or „Expiry“ date is

expired, replace the product pack.

Schedule cleaning activities and

record them.

Danger:

DO.NOT.SPRAY.OR.SPLASH.

THE.DISPENSER.WITH.WATER..

DO.NOT.USE.A.WATER.JET.

FOR.CLEANING..

NEVER.IMMERSE.THE.

DISPENSER.IN.WATER.

Danger:

NEVER.TILT.THE.DISPENSER.

TO.CLEAN.BEHIND.OR.BELOW.

IT...

AVOID.SCALDING!..

THE.BOILER.CONTAINS.VERY.

HOT.WATER.THAT.CAN.SPILL.

OUT.IF.YOU.TILT.OR.MOVE.

THE.DISPENSER.

Training

Train new staff regarding food safety

instructions (HACCP).

Inform new staff about schedules

and cleaning procedures.

Ensure that new staff reads the

operator manual before operating

the dispenser. Keep the operator

manual close to the dispenser.

If there are any other questions, please

contact your Cafitesse system supplier.

•

2011 - 01

2 SAFETY INSTRUCTIONS

Summary of Contents for Cafitesse 300 Next Generation

















































Search results

Summary of Contents for Cafitesse 300 Next Generation

Reviews:

Related manuals for Cafitesse 300 Next Generation

Brands by name

Popular brands

Douwe Egberts Cafitesse 300 Next Generation, Operator'S Manual

Search results

Summary of Contents for Cafitesse 300 Next Generation

Reviews:

Related manuals for Cafitesse 300 Next Generation

Brands by name

Popular brands