Fig. 24
5.CLEANING.THE.DISPENSER
Cleaning.procedures
It is recommended, that you clean your
dispenser at regular intervals. There
are two optional procedures:
‚Clean & Flush‘ the cooling
compartment and the drink outlets.
Caution:
It is recommended to carry out
the procedure „Clean & Flush“
once a week.
‚Flush‘ the drink outlets.
•
•
When.is.cleaning.due?
You must clean the dispenser when
the display indicates that cleaning is
required.
The cleaning icon appears in the
display:
•
Start.‚Clean.&.Flush‘
Press first the STOP button and
then the enter button and hold
them pressed simultaneously for
3-4 seconds to enter the cleaning
mode. (Fig. 24)
Follow the instructions on the display:
PLEASE.REMOVE.ALL.PRODUCT.
PACKS
Open the dispenser door.
Remove the product packs.
1.
2.
3.
Clean.&.Flush
The dispenser has a built-in timer that
will prompt you at least one day a
week to ‚Clean & Flush‘.
The service technician can enable or
disable the the built-in-timer according
to your needs.
When the built-in-timer is enabled:
you can select or deselect the
weekday(s) for ‚Clean & Flush‘ and
‚Flush‘ procedures yourself In the
operator menu «CLEANING DAYS».
you can select one to seven days a
week according to your needs.
•
•
When.is.cleaning.overdue?
If the dispenser is not cleaned within
24 hours, the drink delivery will be
blocked.
The display then shows an icon in the
form of a crossed-out cup:
Start the cleaning program (see next
section).
2011 - 01
21
