7.2
Switching on
Personnel:
System operator
Protective equipment:
Protective workwear
Safety boots
Fig. 16: Turn on power supply.
1. Turn main switch (1) to the right.
ð
The control system is switched on. The
operator interface starts. The start screen if
the visualizer is displayed.
Error messages can be acknowledged
above User Level 1.
2. Acknowledge error messages, if any.
Tap
“Reset”
on the operator panel.
Error messages are acknowledged.
Fig. 17: Switching on control system
3. Press
[On]
(1).
ð
The control system is switched on.
Switching on extension cabinet
Fig. 18: Extension cabinet controls
4. Press
[On]
(1) on extension cabinet.
ð
The control system is switched on.
If multiple extension cabinets are
present, switch on as described in
step 4.
7.3
Switching off
Personnel:
System operator
Protective equipment:
Protective workwear
Safety boots
Fig. 19: Switch off control system.
1. Press
[Off]
(1).
ð
The control system is switched off.
Operation
05/2017
EcoPUC MC - MCU00003EN
19/68
