12-2020
dormakaba Canada Inc. RAC5 XT Installation Guide – PK3737 | 9
3.1.3 Cables (not shown)
NOTE:
Some items come factory installed.
(H)
System cables:
•
Power supply to LEDs
•
Power supply to controller PCB
•
Controller PCB jumpers (card reader type-dependent)
3.1.4 Card Reader(s)
(I)
Contactless reader (see Figure 4)
3.1.5 Locking Device
NOTE:
Locking device(s) dependent on the system configuration ordered.
(J)
Electric strike
(K)
Electromagnetic lock
3.1.6 Power Adapter
NOTE:
Dependent on the countries’ electrical power requirements.
(L)
1x International 24 VDC output adapter with integrated 6-foot (1.8 m) power cable and interchangeable
AC outlet prongs. Input power requirements of 220-240 VAC, 50-60 Hz
Or
(M)
1x North America 24 VAC output power adapter with separate 10-foot (3 m) power cable assembly (2x 18
AWG cables terminated on one end with fork terminals). Input power requirements of 110-120 VAC, 60 Hz
3.1.7 Other Peripherals (optional)
(N)
Request to Exit button (REX)
(O)
Remote Unlock (not shown)
3.1.8 Programming Device
NOTE:
Purchased separately, dependent on hotel configuration.
Programming of the RAC5 XT can only be done with the M-Unit.
3.1.9 Installation Hardware Bag
(S)
4x Philips wood screw, #8 x 1-1/4”
(T)
4x Nylon anchor, #6-10
(U)
4x Concrete anchor, #7-9
(V)
2x Strain relief connector with locking nut
(W)
2x Diode-rectifier
(X)
5x Steel flat washer, #8
(Y)
3x Crimp fork terminal B connector
(Z)
2x Crimp fork terminals, 18-22 AWG
IMPORTANT
