12-2020
dormakaba Canada Inc. RAC5 XT Installation Guide – PK3737 | 3
1 Introduction and Disclaimers
Please read and follow all directions carefully.
These instructions are designed for qualified installers or individuals with knowledge of common safety
practices and the competence to perform the steps described herein.
dormakaba Canada Inc. is not responsible for damage or malfunction due to incorrect installation.
Carefully inspect windows, doorframes, doors, etc. to ensure the installation procedures will
not cause any damage. dormakaba Canada Inc.’s standard warranty does not cover
damages caused by installation. The RAC5 XT should always be installed in a secured room
or facility with controller access to prevent access to the system.
Card reader or other peripheral installations within elevators must only be done with prior
consultation of the elevator manufacturer. A technician from the elevator manufacturer
should always be present for installation. Do not connect to a receptacle controlled by a
switch.
If installing the RAC5 XT in an elevator cage environment, or in proximity to any other equipment that may
generate high levels of electromagnetic interference, follow the installation requirements as indicated in Annex
C to prevent any operational instability.
The Table below outlines Access Control Levels as they pertain to certain Features.
Feature
Level
Destructive Attack Level
I
Line Security
I
Endurance Level
IV
Standby Power
IV
Single Point Locking Device with Key Locks
I
RAC5 XT Model #: T52-XXXXX
Firmware #: FW-516334-V 10.07.20.4
CAUTION
WARNING
