12-2020
dormakaba Canada Inc. RAC5 XT Installation Guide – PK3737 | 16
4.2.5 Complete the Installation
1.
If the access door was removed, reinstall the door to the RAC5 XT enclosure.
2.
Bend the two tabs on the door to a maximum of 30 degrees as shown in Figure 9.
Figure 9 – Door Tabs
3.
Connect the LED wire harness from the power supply to the access door LEDs as indicated in the table
below.
NOTE:
The wires must be connected with the proper polarity. Once the terminals are installed, they are
designed to have a tight fit so removal may damage the LEDs.
LED Description Location on Door ‘+’ Terminal Connection ‘-’ Terminal Connection
Power Status
Top
Red
Orange
Battery Status
Bottom
Red
Yellow
4.
If a battery is part of the system, connect the red (+) and black (-) wires from the power supply to the
battery.
Ensure the proper connections are made (e.g. red to red, black to black).
5.
Plug the power adapter into the AC power source and/or turn on the main AC power to the system.
IMPORTANT
