Dorma ED 200 Mounting Instruction Download Page 6

Page: 6 / 88

DORMA

ED 200
194 605-01-6-50

Recycling and disposal

Safety during mounting

Both the

and its packing mainly consist

of recyclable raw material.
The

and the respective accessories

must not be disposed of as domestic waste.
Please ensure that the old appliance and the
respective accessories (if available) are properly
disposed of.

Please abide by the prevailing national statutory provisions.

The working area has to be secured against
unauthorised access from other people. Falling items
or tools might cause injuries.
The

has to be secured against water and other

liquids.
In any case, the way of mounting and the mounting
equipment, like for example screws and wall plugs,
have to be adequate with regard to the structural
conditions (steel structure, wood, concrete etc.).
Before installing the

the door leaf has to be

checked with respect to proper mechanical condition
and smooth running.
The mounting of the

described herein is only

an example. Structural or local conditions, available
tools or other conditions might suggest a different
approach.
Following the successful installation of the system, the
settings and the proper function of the

and

the safety equipment have to be checked.

ED 200

Safety during commissioning

Inspection and system approval

ED 200

We would recommend taking out a maintenance agreement
with DORMA.

Briefing:

•

•
•

•

•
•

Only specially qualified staff may open the power
supply housing.
Disconnect the

from power supply (de-

energise the system) before removing the cover of the
power supply housing. Remove mains plug or switch
off fuse (with permanent power supply).
Always pull at the plug and never at the cable when
unplugging the power supply.

The protective earth conductor has to be connected.
The safety sensors are to be connected (see
commissioning instructions)..
Separately supplied components such as the program
switch, the EMERGENCY OFF pushbutton and
activators (radar motion detectors, NIGHT-/BANK key
switches) have to be mounted and connected.
Ensure that the door leaves run smoothly
The operator and the door leaf must be properly
linked.

Before the first commissioning and depending on
requirements, however, at least once a year, the

has

to be inspected by a properly qualified technician and
serviced if required.
A person trained by DORMA has to perform the inspection
and approve the system with the aid of the inspection book.
The respective results have to be documented in accordance
with DIN 18650-2 and the facility operator has to keep
these documents for at least one year.

Following the adjustment, commissioning and functional
testing of the door system, the operating instructions have
to be handed over to the facility operator and a briefing has
to be made.

Maintenance

ED 200

DORMA.

Care

ED 200

ED 200.

ED 200

Wear

The system has to be de-energised (disconnected from
power supply) before performing any kind of maintenance
work. Remove the power plug or switch off the fuse (with
permanent power supply).
Please consider the leaflet regarding the application of hold-
open devices for further information and instructions
regarding the application of the

at fire and smoke

doors.
We would recommend taking out a maintenance agreement
with

The system has to be de-energised (disconnected from
power supply) before cleaning the system. Remove the
power plug or switch off the fuse (with permanent power
supply).
You may clean the

with a damp cloth and standard

commercial detergents.
You should not use scouring agents for cleaning purposes as
they might damage the surface finish.
Ensure that no water or other liquids drop on or into the

Never stick metal objects into the openings of the
otherwise you might sustain an electric shock.

The slide piece has to be inspected at regular intervals
(every year) and replaced if required.
Only use original spare parts.