Doosan G06030001, Operation & Maintenance Manual

Page: 78 / 90

78 G60, G80, G100, G150, G200-SIIIA OM Manual
Mechanical servicing
CAUTION
Cleaning the machine using water or a high pressure
washer is strictly prohibited. Any problems arising
from such treatment are not covered by our warranty.
Degreasing: Use a brush and detergent (suitable for paint
work). Dusting: Use an air gun. If the machine is fitted
with air inlet and outlet filters, the maintenance personnel
should clean them routinely at regular intervals. In the
case of dry dust, the filter can be cleaned using
compressed air and / or replaced if it is clogged. After
cleaning the alternator, it is essential to check the winding
insulation (See “CHECKS PRIOR TO FIRST USE” on
page 73).
FAULT DETECTION
If, when commissioned, the alternator does not work
normally, the source of the malfunction must be identified
(See “MECHANICAL DEFECTS” on page 79) (See
“ELECTRICAL FAULTS” on page 80).