Doosan G06030001, Operation & Maintenance Manual

Page: 29 / 90

29 G60, G80, G100, G150, G200-SIIIA OM Manual
OPTIONS [CONT’D]
Display Buttons
Status L.E.D.S
Shutdown - Indicates the generator set has shutdown
due to a fault.
Not in Auto - Indicates that the generator set operation
mode is not in the automatic position.
Running - Indicates that the generator set is running.
Warning - Indicates that the generator set is operating in
a condition outside its normal operational parameters.
Ready / Auto - Indicates the generator set is ready and
is in automatic mode.
Supplying Load - Indicates that the generator set is
under load.
VIEWING REAL-TIME DATA - ACCESSING THE
SCREENS
Press the PAGE button until you reach the primary
operational screen.
Use the INCREASE and DECREASE buttons to scroll
between screens.
Figure 5
This is the primary operational screen which identifies the
status of the generator set along with the generator kW,
power factor, and engine RPM.
Figure 6
This screen displays electrical values of the generator
set. These values include frequency, line voltages, phase
voltages, and current per phase.
Figure 7
This screen displays the engine operational data of the
generator set.
Use this button to scroll the display
between the measurement screen,
adjustment screen and the default
screen. Use it also to back out of the
screens.
Use this button to select an adjustment
parameter and to confirm proper
adjustment.
Use this button to INCREASE setpoint
values and to scroll up the adjustment
menu.
Use this button to DECREASE setpoint
values
and to scroll down the
adjustment menu.
OFF AUT MAN
20
Ready
PF 0.8
RPM 1800
Timer 10
Gen Freq 50.0 Hz
NomVolt L-N 227 V
L1N 277V L12 480V
L2N 277V L23 480V
L3N 277V L31 480V
G-Cur 20 20 20A
Oil Press 3,3 bar
Fuel Level 75 %
Batt Volt 12.1V
Engine Temp 76,7°C