33
DOOR FORCED OPEN WARNING & TIMING (Location 80)
(1) LOCATION
Key in Location
(2) FUNCTION MODES FOR DOOR FORCED OPEN WARNING
The Door Forced Open Warning function works with a Door Position Sensing switch equipped on the
door (usually a magnetic contact). Once a Timing Figure is put into the Function Mode box, the
warning mode is enabled.
0
---
Door Forced Open Warning OFF – (Default)
1
-
999
---
Door Forced Open Warning & Timing
The Timing Figure for the Warning can be 1-999 seconds. The keypad generates the door forced
open warning beeps instantly if the door is forced to open without a valid User Code or pressing of
Egress Button. The beeps will last as long as the time set on the timer and it can be stopped at
anytime with an User Code in Group 1 before the end of the time.
The Manner of The Door Forced Open Warning:
a) The door is forced to open (without using Code or Egress Button) –
Warning
b) The door is opened with Code –
No Warning
c) The door is opened with Egress Button –
No Warning
(3) VALIDATION
Press key once . Two-beeps confirms the entry
DOOR PROPPED-UP WARNING & THE DELAY TIME (Location 81)
(1) LOCATION
Key in Location
(2) FUNCTION MODES FOR DOOR PROPPED-UP WARNING
If somebody opened the door and left it open longer than the allowable delay time, the keypad will
generate door propped-up warning
until the door is re-closed
. There is warning beeps from the
keypad only but it does not activate the alarm output. This function works with a door position
sensing switch equipped on the door.
0
---
Door Propped-up Warning OFF – (Default)
1
-
999
---
Door Propped-up Warning ON & The Delay Time
The Delay Time can be 1 to 999 seconds. It is the allowed time for door open without starting
warning.
(3) VALIDATION
Press key once . Two-beeps confirms the entry
FUNCTION MODES
VALIDATION
LOCATION
0
or
1
-
999
#
81
(2)
(3)
(1)
FUNCTION MODES
VALIDATION
LOCATION
0
or
1
-
999
#
80
(2)
(3)
(1)
80
81
Doorentryonline
Ltd
