15
LOCATION
PARAMETERS
DEFAULT FUNCTIONS & VALUES
0 1
Master Code
0 0 0 0 Factory Set, Not a default value *
0 4
Common User Code 2
Nil ----- User Program Required
1 0
User Codes for O/P 1
Nil ----- User Program Required
2 0
User Codes for O/P 2
Nil ----- User Program Required
4 0
Visitor Codes
Nil ----- User Program Required
4 1
Duress Code for O/P 1
Nil ----- User Program Required
4 2
Duress Code for O/P 2
Nil ----- User Program Required
5 1
O/P Mode of The O/P 1
Time = 5 Sec, Momentary
5 2
O/P Mode of The O/P 2
Time = 5 Sec, Momentary
5 6
Start & Stop Time
Nil ----- User Program Required
5 5
System Real-Time-Clock
Nil ----- User Program Required
9 4
Operation Modes
Code = 0,Keypad Mode
6 0
Personal Safety & Lock-out
Code = 1, 10 False Code Lock-out 60 Sec
7 0
User Code Entry Mode
Code = 2, Manual Entry Mode
7 1
7 2
O/P Operation Announcer
7 3
Status LED Standby Flashing ON-
OFF
Code = 1, Flashing Enabled
8 0
Door Forced Open Warning & Timing
Code = 0, Warning Disabled
8 1
Door Propped-up Warning & Delay
Code = 0, Warning Disabled
9 0
Egress Delay & Warning
Code 1 = 0, Instant, No Delay
Code 2 = 1, Momentary Contact without Warning
Code = 1, Pacifier Tone ON
Code = 1 Sec, Notification Beep ON
Pacifier Tones ON-OFF Selection
THE DEFAULT VALUES AFTER REFRESHING
NOTE:
The DAP Code
2 8 2 8
and the Refreshing Code
9 9 9 9
are fixed in the operating system program.
It can not be changed in any ways.
Doorentryonline
Ltd
