ON-BOARD LED INDICATORS
RED / GREEN (Right)
---
AMBER (Centre)
---------
RED (Left)
----------
PACIFIER TONES & THE LED SIGNALS
The buzzer and the amber LED indicator give following tones and signals respectively for system
status:
It lights up in Green for Output 1 activation; Red for Output 1 inhibited
and flashing during inhibition paused.
It flashes in Standby. It shows the system status in synchronization
with the beep tones. The standby flashing can be OFF with
programming. See Location 73 for the details.
It lights up in Red for output 2 activation.
STATUS
TONES *
AMBER LED
1) In Programming Mode
-----
ON
2) Successful Key Entry
1 Beep
1 Flash
3) Successful Code Entry
2 Beeps
2 Flashes
4) Unsuccessful Code Entry
5 Beeps
5 Flashes
5) Power Up Delay
Continuous Beeps
Continuous Flashes
6) Output Relay Activation **
1 Second Long Beep
7) In Standby ***
-----
1 Flash in 1 Second Interval
8) System Refreshing
9) Code Already Stored in System
-----
Fast Flashes for 2.5 Minutes
1 Long Beep
-----
-----
Continuous 3 Fast Beeps
/5 secs
-----
Continuous 1 Beep/5 secs
11) Real -time-clock stopped after
power failure
10) Keypad link-up with Decoder Failed
-----
NOTE:
*
* *
* * *
JUMPER FOR BACK-LIT SELECTION
1)
Full Back-lit
---
2)
Auto Back-lit
---
3) OFF
---
All Pacifier Tones can be ON or OFF through the programming option at Location 71
The Output Relay Activation beep can be selected through the programming option at
Location 72
The Standby flashing can be ON or OFF through the programming option at Location 73
The keypad gives dim backlit in standby. It
turns to full backlit when a key button is
pressed, then back to dim backlit 10
seconds after the last key button is
pressed.
The backlit is OFF in standby. It turns to
full backlit when a key button is pressed,
then back to OFF 10 seconds after the last
key button is pressed.
Back-lit function disabled.
11
OTHER FACILITIES
BACK-LIT
JUMPER
·······································································································
Doorentryonline
Ltd
