BioClass TR
36
13
CALIBRATION MENU
"Calibration Menu"
consists of a number of processes and parameters that allow the correct set up of
the boiler.
To access the
“Calibration Menu"
, the boiler must be switched off by pressing
tactile button. After
having switched off the boiler press
for 5 seconds to access to the menu. Browse through the
menu by pressing the symbols "
+
" or "
-
" of heating
(18)
. When the desired parameter is displayed,
press
to access and set it. When the parameter or process has been set, press
again, the value
will be saved and the display will return to
“Calibration menu”
. Press RESET any time to go back
without recording any value. In the following table are listed all the parameters and processes
included in
"Calibration menu"
:
Nº. Parameter
Display
1
Feed auger filling
2
Feed auger calibration
3
Manual setting of feed auger calibration
4
Manual ash cleaning activation
5
Manual circulation pumps activation