background image

users guide

Your Ideal users guide

ENGINEERED FOR PEACE OF MIND

When replacing any part on this appliance, use only spare parts that you can be 
assured conform to the safety and performance specification that we require. Do not 
use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.

GTS 4, GTS 5, GTS 6, GTS 7 & GTS 8

Falcon GTS

300013369-001-B

Summary of Contents for Falcon GTS 4

Page 1: ...art on this appliance use only spare parts that you can be assured conform to the safety and performance specification that we require Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers GTS 4 GTS 5 GTS 6 GTS 7 GTS 8 Falcon GTS 300013369 001 B ...

Page 2: ...nded in frosty weather If it is known or suspected that a fault exists on the boiler then it MUST NOT BE USED until the fault has been corrected by a recognised installer Gas Safe Registered Engineer for gas fired boilers Flammable materials must not be placed in close proximity to the appliance Materials giving off flammable vapours must not be stored in the same room as the appliance In cases of...

Page 3: ...orms an air elimination sequence of the hot water calorifier lasting for 1 minute by intermittently operating the DHW load pump and the CH pump This air elimination sequence is de activated if the calorifier temperature is more than 250 C Summer Winter Switch If DHW has been in demand a delay of approx 1 minute will occur for the change from the DHW pump to the CH pump after the changeover to Wint...

Page 4: ...ir is in the boiler or system Repeat the procedure detailed in To light the boiler Frost Protection If frost is likely leave the boiler thermostat at a reduced temperature setting Ensure external controls allow the boiler to operate if necessary Note that this may not protect remote parts of the system in which case a separate frost thermostat should be fitted or the system drained and the boiler ...

Reviews: