41
BIOCLASS iC DX
12
CALIBRATION MENU
"Calibration Menu"
consists of a number of processes and parameters that allow the correct set up of the
boiler.
To access the
“Calibration Menu"
, the boiler must be switched off by pressing
tactile button. After
having switched off the boiler press
for 5 seconds to access to the menu. Browse through the menu
by pressing the symbols "
+
" or "
-
" of heating
(18)
. When the desired parameter is displayed, press
to access and set it. When the parameter or process has been set, press
again, the value will be saved
and the display will return to
“Calibration menu”
. Press RESET any time to go back without recording any
value. In the following table are listed all the parameters and processes included in
"Calibration menu"
:
Nº. Parameter
Display
1
Feed auger filling
2
Feed auger calibration
3
Manual setting of feed auger calibration
4
Manual ash cleaning activation
5
Manual circulation pumps activation
