EN
36
BIOCLASS iC DX
11
SETUP MENU
"Setup menu"
consists of operating parameters of the boiler which can be adjusted by the user (Ashtray
empty warning, timer programming, time setting, ...)
To access to the
“Setup menu"
press
. Browse through the menu by pressing the symbols "
+
" or
"
-
" of heating
(18)
. When a parameter is displayed, press
to access and set it. When the parameter
has been set, press
again, the new value will be saved and the display will return to
“Setup menu”
.
Press RESET any time to go back without recording any value.
The following table lists the parameters of this menu:
Nº. Parameter
Display
1
Time programming of Zone 1.
(*)
(Only with the room sensor connected).
2
Time programming of Zone 2.
(*)
(Only with the Bio Hydraulic Kit and room sensor
connected).
3
Time programming of Zone 3.
(*)
(Only with the Bio Hydraulic Kit and room sensor
connected).
4
Boiler timer programming.
5
CVS Suction System timer programming.
(CVS Suction System option only)
6
DHW recirculation function timer programming.
(DHW tank option only)
7
Time setting.
8
Ashtray empty warning function.
9
Manual setting of feed auger calibration.