EN
Installation
FreshJet
12
7.2
Making a new opening
See fig.
3
➤
Select an area at the centre on the roof between two longitudinal supports.
➤
Mark the position and size of the opening using the template included in the
packaging (
A
and
B
).
See fig.
4
➤
Drill out the corners (
A
).
➤
Carefully cut out the opening on the roof using a keyhole saw or a similar tool (
B
).
Make sure no electrical power cables are damaged.
See fig.
5
➤
Before installation, check whether the roof hole needs reinforcing.
➤
Remove the foam according to the width of your reinforcing rails (not in scope of
delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
FreshJet-ADB2015-I-AU.book Seite 12 Freitag, 26. Januar 2018 9:23 09
