EN
FreshJet
Installation
13
7.3
Installing in a roof hatch opening already provided
I
See fig.
6
➤
Remove all screws and fixtures of the existing roof hatch.
➤
Take out the roof hatch.
See fig.
7
➤
Remove the sealant around the opening using a scraper or similar tool.
See fig.
8
A
➤
Seal the screw holes and recesses with a flexible non-hardening butyl sealing
compound (e.g. SikaLastomer-710, Selleys Butyl Mastic, Bostik ezycaulk butyl
sealant or similar products).
NOTE
•
Existing roof hatch openings in accordance with fig.
3
are suitable
for installing the roof air conditioner.
•
Dispose of all waste material, glue, silicone and seals separately.
Observe the disposal guidelines.
•
The manufacturer only assumes liability for parts included in the
scope of delivery. The validity of the warranty expires if the device is
installed together with third-party parts.
NOTICE!
Observe the sealant manufacturer’s instructions.
FreshJet-ADB2015-I-AU.book Seite 13 Freitag, 26. Januar 2018 9:23 09
