Page 9
Leak Sensor Advanced User Manual
Physical Installation
The device should already be included in your Z-Wave system before continuing
further. Study the Pre-Installation Checklist below for a broad overview of in-
stallation options and other notes to bear in mind
Pre-Installation Checklist
9
The MAIN BODY CRADLE and REMOTE SENSOR PROBE are optional, to
help monitor hard-to-reach areas—study Figures 3 and 4 to understand
when, where, and why to use the REMOTE SENSOR PROBE
9
The Leak Sensor detects moisture the moment water contacts the
METAL FEET on the REMOTE SENSOR PROBE or the MAIN BODY BASE
9
To monitor a pipe or appliance for leaks, place the Leak Sensor nearby on
a flat surface where water is likely to accumulate during a leak
9
If there is not enough space for the SENSOR ASSEMBLY to fit, use the
optional REMOTE SENSOR PROBE
9
When using the REMOTE SENSOR PROBE, the SENSOR ASSEMBLY will
rest in the MAIN BODY CRADLE
9
All three METAL FEET should contact the surface
9
The REMOTE SENSOR PROBE can also hang mid-air to monitor rising water
levels (for example in a sump pump pit)
MAIN SENSOR
LEAK
Figure 3 - Leak Sensor Installation Without the
REMOTE SENSOR PROBE
REMOTE SENSOR PROBE
SENSOR ASSEMBLY
LEAD
Figure 4 - Leak Sensor Installation With the
REMOTE SENSOR PROBE
Physical Installation