ix Gamma
Assembly/Preparing the assembly structures
ix Gamma
9
Preparing the assembly structures
With each ix Gamma delivery you will be provided with a sheet including a table with
the assembly structures of the cylinders. If the positions of the FB/AB body pins are
not provided in the table ex works, you must fill in the pins in the table.
The following generally applies:
One
N body pin
is always mounted to
position 5
.
The
FB/AB body pins
may only be mounted
at the first four positions
,
maximal 2
pins for each cylinder side
.
FB/AB body pins
are mounted to the positions with the
lowest values
. For super-
structures (locking systems), the lowest value including the superstructure is taken
into account.
For 0, 1, 2 lengths, only N pins and for 3, 4, 5, 6, 7, 8 lengths, only AF pins are avail-
able as
core pins
. Core pins are not restricted with regard to positions.
The core
pins are applied at the positions P1 - P 5 depending on their lengths.
Assembly structure without master key wafers
Body pins
4
5
1
2
3
AB
FB
P1
P2
P3
P4
P5
4
5
1
2
3
N
N
AB
FB
N
P1
P2
P3
P4
P5
1.) First,
2 FB/AB body pins
are applied at the
posi-
tions P1 - P4
with the smallest values.
(in this case: position P3 = value 1 and P4 = value
2)
2.) The
N pins
are applied at the
remaining posi-
tions
.
