![background image](http://html.mh-extra.com/html/ilco-unican/dt-509275-amm/dt-509275-amm_installation-instructions_2043314001.webp)
®
Internet:
www.ilcounican.com
US & Canada:
ILCO UNICAN INC. , UNICAN Electronics Division
7301 Decarie Boulevard, Montreal, Quebec
H4P 2G7, Canada
Tel.: 800 906 4526 Fax: 800 490 3785
E-mail: [email protected]
International:
Tel.: +1 514 735 5419
Fax: +1 514 735 1393
E-mail: [email protected]
®
ILCO UNICAN is not responsible for any damage caused by installation.
Please read and follow all instructions carefully.
Since correct installation is critical, carefully check windows,
frame, door, etc. to ensure that the recommended procedures
will not cause any damage.
PK2723/03/01 Printed in Canada.
Installation Jig Door Preparation Instructions
WORK INSTRUCTION FOR MORTISE DRILLING JIG ASSEMBLY
A
. Take one black clamp and align its
screw with the jig’s central hole.
Solitaire 710, 710-II and SMART Series
• American & Slim Motorized Mortise
(AMM & SMM)
Version
• American & Slim Mortise
(ASM & ESM)
Version
(710 Series only)
B
. To tighten the clamp in place,
use a
5
⁄
32
”
Allen key.
C
. Repeat steps A & B to install other clamp.
Technical Support Hotline
Call
800 906 4526
(US & Canada) or
(514) 340 9025
(International) from 8:30 AM to 9:00 PM Eastern Time,
Monday to Friday (except holidays).