8
11.01.16 en / 627
Connection Example
M10940
L1
L3
L
N
L2
11
12
U<
P>
14
21 22 24
MH9300.12
k
L1/i
L2
L3
A1
A2
+24V
IN1
IN2
PLC input
Set Up Procedure
The connection has to be made according to the connection examples. To
connect the current of L1 the Terminals I and k are available. If the current
to be measured exceeds the maximum continuous current of the input and
external current transformer has to be used. If current is not measured
input k remains unconnected.
Safety notes
Dangerous voltage.
Electric shock will result in death or serious injury.
Disconnect all power supplies before servicing equipment.
- Faults must only be removed when the relay is disconnected
- The user has to make sure that the device and corresponding compo-
nents are installed and wired according to the local rules and law
(TUEV, VDE, Health and safety).
- Settings must only be changed by trained staff taking into account the
safety regulations. Installation work must only be done when power is
disconnected.
- Observe proper grounding of all components
E. DOLD & SÖHNE KG • D-78114 Furtwangen
e-mail: [email protected] • internet: http://www.dold.com
•
PO Box 1251 • Telephone (+49) 77 23 / 654-0 • Telefax (+49) 77 23 / 654-356
