4
11.01.16 en / 627
Operating
Display (RUN) Mode
Input-Mode
Display inverted when the actual value is in failure state.
Measurement interrupted, relays are in failure state,
indicator LED orange color
Scroll display between the 10 different measuring values.
Chose Rel1, Rel2, T
a
and RUN
As option address for RS485 Bus
Chose parameter
Change and set response values for Rel1 and Rel2.
Reset fault memory:
Esc
Shift cursor to the left
Shift cursor to the right
Esc
For more the 3 sec, change to input mode
For more than 3 sec, change to display mode
After connecting the auxiliary supply A1/A2 the unit is in display (Run)
mode
:
The display is inverted when a measured value is exceeds the settings.
With button
the fault memory is reset.
The actual measured values can be toggled with the
buttons.
Pressing button
Esc
for more than 3 sec the unit changes to input mode.
In input mode the measurement is disabled, the relays are in failure mode
and the indicator LED is orange.
With the buttons
the different setting values can be chosen.
Move cursor position
One character to the right
Esc
One character to the left
Back to the Display (Run)-Mode
Press button
3 s
OK
New values stored
or
Press button
Esc
3 s;
Break Values unchanged
RUN
on the display confirm with
to change to display (Run) mode.
Operating - Display - Menü (RUN) Mode
Ta
Rel2
Rel1
Esc 3s
Esc (Break) 3s
Break
(cancel changes)
OK-
(return with new settings)
(OK) 3s
Ph-Seq
Start up delay
Input-mode
Display (Run) -
mode
Response value for Rel2
variant MH
RUN
f
Q
S
P
Cos-Phi
I
Asym
Umax
Umin
M10931
Response value for Rel1
I
Asym
Umax
Cursor-
display
relay 2 energized
relay 1 and 2 energized
Cursor flashes during time delay tv
R1
R1
R1
R2
R2
R2
Umin
Cos-
actual
value
actual
value
actual
value
actual
value
actual
value
actual
value
actual
value
actual
value
actual
value
P
S
Q
f
Ph-
[A]
[%]
[V]
[V]
Phi
[W]
[VA]
[var]
[Hz]
feld
M11002
relay 1 energized