4.7 GPIO configuration
The general purpose input and output (GPIO) option allows you to control some DP590
functions on a connected console.
General purpose input and output connects with a console through an Integ Jnior
automation controller. (The Jnior automation controller is a third-party product and is not
included with the DP590 .) On the console, it allows you to select a particular presentation,
or to select a configuration to monitor. There are eight input connections on the DP590
available to assign a particular function.
After each operation, the DP590 sends a confirmation to the console.
4.7.1 Configuring GPIO
Configure the GPIO connection to a console to control some of the DP590 functions.
Procedure
1. From the
Settings
menu, select
GPIO Config
.
The GPIO Configuration window opens.
2. To connect with a GPIO device, enter the IP address and port number in the appropriate
fields.
3. To assign a function to pins 1 through 8, select it from the drop-down lists.
4. Click
Connect
.
Connection Status
changes to
Connected
.
5. Click
OK
.
4.8 Monitoring local output
Listen to the outputs of different configurations.
About this task
You can listen to the output of any configuration using the target device drop-down list. This
control enables you to determine what a particular dynamic object rendering configuration
would sound like before generating metadata.
Procedure
1. Select a presentation tab.
2. On the presentation tab, from the target device list, select a configuration that you want
to monitor.
Dolby Object Authoring Tool DP590 operation
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017
23
