Procedure
1. Select a presentation.
2. From the target device drop-down list (below the presentation tabs), select the type of
output you want to configure.
For example, if you want to deliver a stereo experience with a different setting than a 5.1
experience that you have already designated, select the
Stereo
option.
Figure 7: Target device list
3. Make any changes to the dynamic object settings that you want to be part of the device
configuration.
For example, move the dynamic object from one speaker position to another that you
want to emphasize for this presentation.
4. Click
Save
.
4.6 Setting production renderers
Set the production renderers to create a legacy transmission format alternative to the main
Dolby Atmos mix.
About this task
Production renderers allow you to create an audio mix with 2.0 and 5.1 formats (providing
alternative formats to the main immersive audio mix). This alternative 2.0 and 5.1 content is
sent through a console to a legacy encoder or embeder (through the MADI output on channel
11–16 for 5.1 and 17–18 for 2.0).
Procedure
1. To select a presentation with the desired 2.0 and 5.1 setup, from the
Settings
menu,
select
Production Renderers
.
The Production Renderers window appears.
2. From the
Production presentation
drop-down list, select the desired presentation.
3. To apply the selected presentation to the production renderers, click on the
Send
Metadata
button.
Results
The 2.0 and 5.1 setup from the selected presentation will be used as a legacy setup.
Dolby Object Authoring Tool DP590 operation
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017
22
