4.5 Enabling beds and dynamic objects for
presentations
Enable beds and dynamic objects for selected presentations.
About this task
There are the following requirements for the list of enabled beds and dynamic objects:
•
A maximum 62 occupied channels are allowed for enabled beds and dynamic objects.
Note that beds and objects occupy different numbers of channels depending on the type,
as presented here:
Bed type or object
Number of occupied channels
Dynamic
1
Bed 2.0
2
Bed 5.1
6
Bed 5.1.2
8
Bed 5.1.4
10
Procedure
1. Select the presentation you want to enable bed and dynamic objects for.
Note:
Double-click the presentation tab to change its name. Press Enter to confirm
the change.
2. Check the
Enable
box for the bed and dynamic objects you want to activate.
Note:
Double-click the bed or dynamic object label to change its name. Press Enter to
confirm the change.
3. Click
Save
to save the presentation configuration.
4. Repeat the procedure for each presentation you want to configure.
Results
The beds and dynamic objects are enabled and they are ready for configuration.
Related information
Setting dynamic object parameters
4.5.1 Setting bed parameters
Adjust the channel gain levels of the selected bed for monitoring.
Prerequisites
Ensure the bed is enabled.
Procedure
1. Select the bed to which you want to adjust the channel gain levels.
2. Set the gain levels of individual channels to change the mix.
Dolby Object Authoring Tool DP590 operation
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017
19
