Figure 5: Bed parameters
Note:
Note that the new gain levels are audible only when monitoring. However, use
the gain of the
L
channel only to set the overall gain used in the DP591 encoding
stage.
3. Click
Save
to save the changes.
Results
The channel gain levels of the selected bed are changed for monitoring.
4.5.2 Setting dynamic object parameters
You can set a range of parameters for individual dynamic objects, including gain, category,
and field placement parameters.
Procedure
1. Select a presentation. Settings for dynamic objects will apply only to those in the chosen
presentation.
2. Ensure that the dynamic object is enabled and selected.
3. Set the gain on the channel to which a dynamic object is assigned using any of these
methods:
a) Double-click in the individual channel
Gain
box to highlight the numeral, and then
enter any value between -49 and +15 dB.
The -49 dB setting entirely mutes an object.
b) Click the up/down arrows within the
Gain
box to change the value in increments of 1
dB. You can hold an arrow to scroll through the values at a faster pace.
Dolby Object Authoring Tool DP590 operation
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017
20
