Dog Guard DG9000, Installation And Training Manual

Page: 6 / 41

Transmitter Installation
The first step in installing the Dog Guard system is putting the transmitter in place.
We recommend installing the transmitter in either the garage or the basement.
•
When laying your twisted pair wire, try to make the distance from the
transmitter to the loop wire as short as possible to cut down on line resistance.
•
The INDICATOR LIGHTS on the transmitter should be easily visible from a
distance so that you can quickly see if the unit is operational.
•
The GREEN LIGHT lets you know that the unit is on.
•
The YELLOW FAULT LIGHT will come on if there is an internal problem
with the transmitter board, i.e.: a lightning hit or power surge.
•
The RED LOOP LIGHT indicates that the wire loop is intact.
•
Place the transmitter within 6 feet of a 110V electrical outlet.
•
The transmitter should be installed at least 10 feet from any existing piping.
Dog Guard’s state-of-the-art transmitter
3