manualshive.com logo in svg

Dodge Durango 2016, Owner'S Manual

The Dodge Durango 2016 Owner's Manual is a comprehensive guide that provides essential information for every Durango owner. This manual covers all aspects of the vehicle, from maintenance and troubleshooting to operating instructions. Download your free copy of the manual from our website manualshive.com, and unlock the full potential of your Dodge Durango 2016.

Share
Download
background image

strap. See the section “Installing Child Restraints
Using the Top Tether Anchorage” for directions to
attach a tether anchor.

9. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt
path. It should not move more than 1 inch (25.4 mm)
in any direction.

Any seat belt system will loosen with time, so check the
belt occasionally, and pull it tight if necessary.

Installing Child Restraints Using the Top Tether
Anchorage

WARNING!

Do not attach a tether strap for a rear-facing car seat
to any location in front of the car seat, including the
seat frame or a tether anchorage. Only attach the

(Continued)

WARNING!

(Continued)

tether strap of a rear-facing car seat to the tether
anchorage that is approved for that seating position,
located behind the top of the vehicle seat. See the
section “Lower Anchors and Tethers for CHildren
(LATCH) Restraint System” for the location of ap-
proved tether anchorages in your vehicle.

106

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Durango 2016




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Durango 2016

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Brand: HAUL MASTER Pages: 8
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
Mitsubishi Montero 1988 Manual preview
Montero 1988
Brand: Mitsubishi Pages: 367
Curt Manufacturing 58963 Installation Manual preview
58963
Brand: Curt Manufacturing Pages: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Brand: Whispbar Pages: 112

Brands by name

Popular brands

Load more brands