manualshive.com logo in svg

Dodge Durango 2016, Owner'S Manual

The Dodge Durango 2016 Owner's Manual is a comprehensive guide that provides essential information for every Durango owner. This manual covers all aspects of the vehicle, from maintenance and troubleshooting to operating instructions. Download your free copy of the manual from our website manualshive.com, and unlock the full potential of your Dodge Durango 2016.

Share
Download
background image

NOTE:

•

In the event of a power malfunction to the liftgate, an
emergency liftgate latch release can be used to open
the liftgate. The emergency liftgate latch release can be
accessed through a snap-in cover located on the lift-
gate trim panel.

•

If the liftgate is left open for an extended period of
time, the liftgate may need to be closed manually to
reset power liftgate functionality.

WARNING!

During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.

NOTE:

•

The power liftgate buttons will not operate if the
vehicle is in gear or the vehicle speed is above 0 MPH
(0 km/h).

•

The power liftgate will not operate in temperatures
below −22°F (−30°C) or temperatures above 150°F
(65°C). Be sure to remove any buildup of snow or ice
from the liftgate before pushing any of the power
liftgate switches.

•

If anything obstructs the power liftgate while it is
closing or opening, the liftgate will automatically
reverse to the closed or open position, provided it
meets sufficient resistance.

•

There are also pinch sensors attached to the side of the
liftgate. Light pressure anywhere along these strips
will cause the liftgate to return to the open position.

50

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Durango 2016




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Durango 2016

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Radical Sportscars SR 3 SL Owner'S Handbook Manual preview
SR 3 SL
Brand: Radical Sportscars Pages: 44
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Oldsmobile 1994 Bravada Owner'S Manual preview
1994 Bravada
Brand: Oldsmobile Pages: 248
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Brand: CITROEN Pages: 26

Brands by name

Popular brands

Load more brands