manualshive.com logo in svg

Dodge Durango 2016, Owner'S Manual

The Dodge Durango 2016 Owner's Manual is a comprehensive guide that provides essential information for every Durango owner. This manual covers all aspects of the vehicle, from maintenance and troubleshooting to operating instructions. Download your free copy of the manual from our website manualshive.com, and unlock the full potential of your Dodge Durango 2016.

Share
Download
background image

NOTE:

When recreational towing your vehicle, always

follow applicable state and provincial laws. Contact state
and provincial Highway Safety offices for additional
details.

Recreational Towing — Rear-Wheel Drive Models

DO NOT flat tow this vehicle. Damage to the drivetrain
will result.

Recreational towing (for two-wheel drive models) is
allowed

ONLY

if the rear wheels are

OFF

the ground.

This may be accomplished using a tow dolly or vehicle
trailer. If using a tow dolly, follow this procedure:

1. Properly secure the dolly to the tow vehicle, following

the dolly manufacturer’s instructions.

2. Drive the rear wheels onto the tow dolly.

3. Firmly apply the parking brake. Shift the transmission

into PARK.

4. Turn the ignition switch to the OFF position.

5. Properly secure the rear wheels to the dolly, following

the dolly manufacturer’s instructions.

6. Install a suitable clamping device, designed for tow-

ing, to secure the front wheels in the straight position.

CAUTION!

Towing with the rear wheels on the ground will
cause severe transmission damage. Damage from
improper towing is not covered under the New
Vehicle Limited Warranty.

588

STARTING AND OPERATING

Summary of Contents for Durango 2016




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Durango 2016

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
Whispbar K448W Fitting Instructions Manual preview
K448W
Brand: Whispbar Pages: 15
RAM 2011 DAKOTA User Manual preview
2011 DAKOTA
Brand: RAM Pages: 76
Advantech TREK-550 Manual preview
TREK-550
Brand: Advantech Pages: 59
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
RAM 1500 2WD 2021 Owner'S Manual preview
1500 2WD 2021
Brand: RAM Pages: 496
Mercedes-Benz Sprinter 2003 Manual preview
Sprinter 2003
Brand: Mercedes-Benz Pages: 296
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Ford transit connect 2012 User Manual preview
transit connect 2012
Brand: Ford Pages: 299
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116
ICON 58990 Owner'S Manual & Safety Instructions preview
58990
Brand: ICON Pages: 4
Safe Fleet Prime Design AAL-8003 Manual preview
Prime Design AAL-8003
Brand: Safe Fleet Pages: 8
Jaeger-leCoultre 21500632 Fitting Instructions Manual preview
21500632
Brand: Jaeger-leCoultre Pages: 13

Brands by name

Popular brands

Load more brands