manualshive.com logo in svg

Dodge Durango 2016, Owner'S Manual

The Dodge Durango 2016 Owner's Manual is a comprehensive guide that provides essential information for every Durango owner. This manual covers all aspects of the vehicle, from maintenance and troubleshooting to operating instructions. Download your free copy of the manual from our website manualshive.com, and unlock the full potential of your Dodge Durango 2016.

Share
Download
background image

REVERSE (R)

This range is for moving the vehicle backward. Shift into
REVERSE only after the vehicle has come to a complete
stop.

NEUTRAL (N)

Use this range when the vehicle is standing for prolonged
periods with the engine running. Apply the parking
brake and shift the transmission into PARK if you must
leave the vehicle.

WARNING!

Do not coast in NEUTRAL and never turn off the
ignition to coast down a hill. These are unsafe
practices that limit your response to changing traffic
or road conditions. You might lose control of the
vehicle and have a collision.

CAUTION!

Towing the vehicle, coasting, or driving for any other
reason with the transmission in NEUTRAL can cause
severe transmission damage. Refer to “Recreational
Towing” in “Starting And Operating” and “Towing A
Disabled Vehicle” in “What To Do In Emergencies”
for further information.

DRIVE (D)

This range should be used for most city and highway
driving. It provides the smoothest upshifts and down-
shifts, and the best fuel economy. The transmission
automatically upshifts through all forward gears. The
DRIVE position provides optimum driving characteris-
tics under all normal operating conditions.

5

STARTING AND OPERATING

487

Summary of Contents for Durango 2016




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Durango 2016

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
Qeedon Higlow Series Product Instruction preview
Higlow Series
Brand: Qeedon Pages: 2
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
Air Lift 88365 Installation Manual preview
88365
Brand: Air Lift Pages: 28

Brands by name

Popular brands

Load more brands