manualshive.com logo in svg

Dodge Durango 2016, Owner'S Manual

The Dodge Durango 2016 Owner's Manual is a comprehensive guide that provides essential information for every Durango owner. This manual covers all aspects of the vehicle, from maintenance and troubleshooting to operating instructions. Download your free copy of the manual from our website manualshive.com, and unlock the full potential of your Dodge Durango 2016.

Share
Download
background image

WARNING!

A frayed or torn belt could rip apart in a collision and
leave you with no protection. Inspect the belt system
periodically, checking for cuts, frays, or loose parts.
Damaged parts must be replaced immediately. Do
not disassemble or modify the system. Seat belt
assemblies must be replaced after a collision if they
have been damaged (i.e., bent retractor, torn web-
bing, etc.).

FUSES

WARNING!

•

When replacing a blown fuse, always use an ap-
propriate replacement fuse with the same amp
rating as the original fuse. Never replace a fuse

(Continued)

WARNING!

(Continued)

with another fuse of higher amp rating. Never
replace a blown fuse with metal wires or any other
material. Failure to use proper fuses may result in
serious personal injury, fire and/or property dam-
age.

•

Before replacing a fuse, make sure that the ignition
is off and that all the other services are switched off
and/or disengaged.

•

If the replaced fuse blows again, contact an autho-
rized dealer.

•

If a general protection fuse for safety systems (air
bag system, braking system), power unit systems
(engine system, gearbox system) or steering system
blows, contact an authorized dealer.

676

MAINTAINING YOUR VEHICLE

Summary of Contents for Durango 2016




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Durango 2016

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Dodge Challenger 2013 Owner'S Manual preview
Challenger 2013
Brand: Dodge Pages: 543
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
K&N Engineering Filtercharger 57-9004 Installation Manual preview
Filtercharger 57-9004
Brand: K&N Engineering Pages: 4
Honda Element 2004 Owner'S Manual preview
Element 2004
Brand: Honda Pages: 219
Quadratec 506-Rock Quick Start Quide preview
506-Rock
Brand: Quadratec Pages: 2
RADICAL R-C10AD2 Device Installation Manual preview
R-C10AD2
Brand: RADICAL Pages: 11
Gator ARV43M Instruction Manual preview
ARV43M
Brand: Gator Pages: 5
Jackson Racing 999-200 Installation Instructions Manual preview
999-200
Brand: Jackson Racing Pages: 14
Saleen 10-8002-C12167A Installation Manual preview
10-8002-C12167A
Brand: Saleen Pages: 6

Brands by name

Popular brands

Load more brands