manualshive.com logo in svg

Dodge Dakota 2011, Owner'S Manual

The 2011 Dodge Dakota Owner's Manual is a comprehensive guide that provides users with all the necessary information to operate and maintain their vehicle. Available for free download at manualshive.com, this manual is a must-have resource for every Dakota owner, offering valuable insights and instructions on various aspects of the vehicle's features and controls.

Share
Download
background image

4. Within 15 seconds, cycle the key from the LOCK
position to the ON/RUN position and back to LOCK
position, a minimum of four times; ending in the LOCK
position.

(Do not start the engine.)

5. Within 30 seconds, press the driver’s door LOCK
switch in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. To reactivate the feature, repeat the above steps.

8. If a chime is not heard, program mode was canceled
before the feature could be changed. If necessary, repeat
the above procedure.

Child-Protection Door Lock

To provide a safer environment for children riding in the
rear seat, the rear doors of your vehicle have the child-
protection door lock system.

Child-Protection Door Lock Location

32

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Dakota 2011











































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Dakota 2011

Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24
Jeep Grand Cherokee Specfications preview
Grand Cherokee
Brand: Jeep Pages: 8

Brands by name

Popular brands

Load more brands