manualshive.com logo in svg

Dodge Dakota 2011, Owner'S Manual

The 2011 Dodge Dakota Owner's Manual is a comprehensive guide that provides users with all the necessary information to operate and maintain their vehicle. Available for free download at manualshive.com, this manual is a must-have resource for every Dakota owner, offering valuable insights and instructions on various aspects of the vehicle's features and controls.

Share
Download
background image

A new engine may consume some oil during its first few
thousand miles (kilometers) of operation. This should be
considered a normal part of the break-in and not inter-
preted as an indication of difficulty.

SAFETY TIPS

Transporting Passengers

NEVER TRANSPORT PASSENGERS IN THE CARGO
AREA.

WARNING!

•

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may
cause serious injury or death.

(Continued)

WARNING! (Continued)

•

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

77

Summary of Contents for Dakota 2011











































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Dakota 2011

Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Mercedes-Benz 2013 S-CLASS Owner'S Manual preview
2013 S-CLASS
Brand: Mercedes-Benz Pages: 493
Yakima K1043 Manual preview
K1043
Brand: Yakima Pages: 10
Wabtec R-290 Service Manual preview
R-290
Brand: Wabtec Pages: 216
Intellitronix BG6003 Installation Manual preview
BG6003
Brand: Intellitronix Pages: 11
Genesis G90 Simple Manual preview
G90
Brand: Genesis Pages: 18
Toyota 2012 CAMRY LE Emergency Response Manual preview
2012 CAMRY LE
Brand: Toyota Pages: 31
Terex TA400 Operation Manual preview
TA400
Brand: Terex Pages: 177
BMW BMW M2 COMPETITION Owner'S Manual preview
BMW M2 COMPETITION
Brand: BMW Pages: 278
JVC LVT1026-007A Instructions preview
LVT1026-007A
Brand: JVC Pages: 2
SSANGYONG Actyon Sports II 2012.01 Manual preview
Actyon Sports II 2012.01
Brand: SSANGYONG Pages: 719
Spyder Auto PRO-YD-DR02 Series Installation Manual preview
PRO-YD-DR02 Series
Brand: Spyder Auto Pages: 3
Philips SCM4380/27 User Manual preview
SCM4380/27
Brand: Philips Pages: 12

Brands by name

Popular brands

Load more brands