Dodge Dakota 2011 Owner'S Manual Download Page 210

Page: 210 / 458

SCAN Button (Auxiliary Mode)

No function.

EJECT Button (Auxiliary Mode)

No function.

TIME Button (Auxiliary Mode)

Press the TIME button to change the display from
elapsed playing time to time of day. The time of day will
display for five seconds.

RW/FF (Auxiliary Mode)

No function.

SET Button (Auxiliary Mode)

No function.

Operating Instructions — Voice Command System
(If Equipped)

For the radio, Refer to “Voice Command” in the
Uconnect™ User Manual located on the DVD for further
details.

Operating Instructions - Uconnect™ Phone (If
Equipped)

Refer to “Uconnect™ Phone” in the Uconnect™ User
Manual located on the DVD for further details.

Operating Instructions - Video Entertainment
System (VES)™ (If Equipped)

Refer to “Video Entertainment System (VES)™” in the
Uconnect™ User Manual located on the DVD for further
details.

Dolby

威

Manufactured under license from Dolby

威

Laboratories.

⬙

Dolby

威⬙

and the double-D symbol are trademarks of

Dolby

威

Laboratories.

208

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for Dakota 2011











































































































































































































































































































































































































































































Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands

Dodge Dakota 2011, Owner'S Manual

Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands