Dodge Dakota 2011 Owner'S Manual Download Page 100

Page: 100 / 458

NOTE:

•

The phone handset must support Bluetooth

威

OBEX

transfers of phonebook entries to use this feature.

•

Some phones cannot send phonebook entries if they
are already connected to any system via Bluetooth

威

and you may see a message on the phone display that
the Bluetooth

威

link is busy. In this case, the user must

first disconnect or drop the Bluetooth

威

connection to

the Uconnect™ Phone, and then send the address
book entry via Bluetooth

威

. Please see your phone

Owner’s Manual for specific instructions on how to
drop the Bluetooth

威

connection.

•

If the phonebook entry is longer than 24 characters, it
will only use the first 24 characters.

Edit Uconnect™ Phonebook Entries

NOTE:

•

Editing names in the phonebook is recommended
when the vehicle is not in motion.

•

Automatic downloaded phonebook entries cannot be
deleted or edited.

•

Press the

button to begin.

•

After the “Ready” prompt and the following beep, say
“Phonebook Edit”.

•

You will then be asked for the name of the phonebook
entry that you wish to edit.

•

Next, choose the number designation (home, work,
mobile, or other) that you wish to edit.

•

When prompted, recite the new phone number for the
phonebook entry that you are editing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Dakota 2011











































































































































































































































































































































































































































































Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands

Dodge Dakota 2011, Owner'S Manual

Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands