Dodge Dakota 2011 Owner'S Manual Download Page 297

Page: 297 / 458

WARNING! (Continued)

•

Failure to equip your vehicle with tires having
adequate speed capability can result in sudden tire
failure and loss of vehicle control.

CAUTION!

Replacing original tires with tires of a different size
may result in false speedometer and odometer read-
ings.

TIRE CHAINS

CAUTION!

•

The use of chains is permitted only on vehicles
equipped with P245/70R16 tires.

•

Use only “Class S” chains or other traction aids
that meet SAE Type “S” specifications.

•

Tire chain use is permitted only on the rear tires.

•

Chains must be the proper size for the vehicle, as
recommended by the chain manufacturer.

STARTING AND OPERATING

295

Summary of Contents for Dakota 2011











































































































































































































































































































































































































































































Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands

Dodge Dakota 2011, Owner'S Manual

Search results

Summary of Contents for Dakota 2011

Reviews:

Related manuals for Dakota 2011

Brands by name

Popular brands