4
Unplugging
a
To unplug the external connector of the FOMA
USB Cable with Charge Function 02 (optional),
pull it straight out while holding the release
buttons of the connector (
a
)
USB connector
Release button
External connector
(Label side up)
Release button
b
Unplug the FOMA USB Cable with Charge
Function 02 from the USB port of the PC (
b
).
Note
• Do not unplug the FOMA USB Cable with
Charge Function 02 during data communication
because doing so will cause communication to
be cut off , or an operation failure or data loss.
• Do not connect FOMA USB Cable with Charge
Function 02 to the connector by sheer strength.
Doing so may result in malfunction. The
connectors must be inserted with the correct
orientation and angle. With correct orientation
and angle, the connectors can be plugged
smoothly without requiring excessive force. If
you cannot connect the cable easily, do not use
excessive force. Check the orientation, angle
and shape of the connectors again.
• Do not apply excessive force to disconnect the
FOMA USB Cable with Charge Function 02.
Using excessive force may result in malfunction.
Cautions when
Installing/Uninstalling
Keep the following in mind when installing or
uninstalling L-03B communication setting fi les
(Driver) or DOCOMO Connection Manager.
• Make sure to install or uninstall the software from
a user account with the administrator privileges. An
error will occur if you attempt to install or uninstall
them from an account without administrator
privileges. For settings and operations regarding
PC administrator privileges, contact your PC
manufacturer or Microsoft Corporation.
• Before you install or uninstall the software, check
that no other software is running. Quit any running
software before installing or uninstalling.
b
For Windows 7
If the "ユーザーアカウント制御 (User Account
Control)" screen appears, click "はい (Yes)".
For settings and operations regarding PC
administrator privileges, contact your PC
manufacturer or Microsoft
Corporation
.
b
For Windows Vista
If the "ユーザーアカウント制御 (User Account
Control)" screen appears, click "許可 (Permit)"
or "続行 (Continue)", or enter the password,
then click "OK". For settings and operations
regarding PC administrator privileges, contact
your PC manufacturer or Microsoft
Corporation
.
