3
Flow of Setup for Data
Communication
The fl ow for preparing to connect the FOMA
terminal and a PC for performing packet
communication is as follows.
Check that "USB mode setting" of the FOMA
terminal is set to "Communication mode"→P3
Connect the FOMA terminal and the PC
using a FOMA USB Cable with Charge
Function 02 (optional)→P3
Download and install the L-03B
communication setting fi les
• Install them using bundled CD-ROM
or
• Download and install from the DOCOMO
web page
Check after installation→P10
Install DOCOMO
Connection Manager
and set up with it
→P11
Set up without
DOCOMO
Connection
Manager→P16
Connect→P25
L-03B communication setting fi les and
DOCOMO Connection Manager
L-03B Communication Setting Files (Driver)
This software (driver) is required for packet
communication or fi le transfer when the FOMA
terminal and a PC are connected using the FOMA
USB Cable with Charge Function 02.
DOCOMO Connection Manager
This software facilitates simple confi guration or
the settings for a packet communication access
point (APN), dial-up connection, etc.
Connecting the FOMA
Terminal and the PC
This section explains how to connect the FOMA
terminal and a PC using the FOMA USB Cable
with Charge Function 02 (optional).
USB mode setting
Setting the USB Mode
Set the FOMA terminal's "USB mode setting" to
"Communication mode".
a
M
▶ "Settings" ▶ "Other" ▶ "USB
mode setting"
b
"Communication mode"
Connect the FOMA Terminal
and a PC Using a FOMA USB
Cable with Charge Function 02
(optional)
a
Open the external connector terminal
cover (
a
) of the FOMA terminal and
hold the external connector of the
FOMA USB Cable with Charge Function
02 so that the label is facing upwards
and insert the connector straight into
the terminal until you hear it click into
place (
b
)
b
Plug the USB connector of the FOMA
USB Cable with Charge Function 02 to
a USB port on the PC (
c
)
USB connector
Release button
External connector
(Label side up)
Release button
Continue on the next page