Docomo Style F-02A, Instruction Manual

Page: 41 / 469

39
Before Using the Handset
❖
Tilting FOMA terminal
■
Rotating the screen display according to the orientation of FOMA terminal
While displaying Full Browser screen, watching 1Seg, playing 1Seg video, playing
a movie/i-motion (except playlist) or playing Music&Video Channel, tilting FOMA
terminal 90 degrees counterclockwise switches the display to the horizontal display.
Tilting the terminal 90 degrees clockwise from the horizontal display restores the
vertical display.
･
While an image (JPEG format) is displayed, the orientation of FOMA terminal is
detected regardless of the direction of rotation, and display orientation and
display size are automatically adjusted.
■
Flash graphics change
When Flash graphics that support motion sensor are set to stand-by display, Mini-
games or Toy's world, an image changes by moving FOMA terminal.
■
Changing vertical/horizontal position or orientation of an image
automatically when shooting a still image
The orientation of still image to be saved changes automatically according to the
orientation of FOMA terminal.
→
P188
✔
INFORMATION
･
Depending on the location or strength of double-tapping, unintended operations may
be performed. Note that tapping too strongly may cause malfunction.
･
While walking or in a place with much vibration, double-tapping operations may not
work correctly.
･
It may operate as double-tapping when lifting FOMA terminal with your hand.
◆
Enabling Motion sensor <Motion sensor>
1
m
[Settings & NW services]
77 e 1
or
2
･
Even when "OFF" is set, Mini-game or Toy's world (except the activation by
double-tapping) operates.
Using UIM (FOMA card)
UIM (FOMA card) is a card for storing user information such as phone numbers.
･
If UIM is installed incorrectly or if there is a problem with UIM, you cannot make/
receive a call or send/receive a mail.
･
For details on handling UIM, refer to the UIM manual.
◆ Installing/Removing
･
After turning the power OFF, fold FOMA terminal and hold it with your hand.
･
Take care not to touch or scratch the IC part.
･
Attaching/Removing back cover and battery pack → P41
■ Installing
a
Pull the tab and pull out the tray until it clicks.
b
Hold UIM with the IC side up, align the beveled corner with the tray and push into
the tray until it stops.
■ Removing
a
Perform
a
of installing operation.
b
Take out UIM.
Tab
Tray
Corner cut
IC
UIM