Docomo Style F-02A, Instruction Manual

Page: 194 / 469

192
Camera
Bar code reader
Using bar code reader
You can read and use information of JAN code, QR code, NW7 code and CODE39
code. Up to 5 pieces of information can be saved.
･
QR code cannot be scanned for some versions (type and size).
･
NW7 and CODE39 codes have a large width and may be unfocused and fail in
recognition when trying to display the entire code on the screen. Such code is
easily recognized when Auto focus is used or FOMA terminal is brought close to
the center of the code until it is focused.
･
Scratches, dirt, damages, low print quality and the strong reflection of light may
disable code reading.
･
You can activate it from the character entry screen and enter the scanned data. →
P312
■ JAN code
JAN code is a bar code representing a number with vertical lines (bars) of different
widths. The bar code of 8 digits (JAN8) or 13 (JAN13) can be read.
■ QR code
QR code is the 2-dimensional codes representing a string of alphanumeric, kanji,
hiragana, katakana, pictograms or data such as melody and image with the vertical
and horizontal patterns.
■ NW7 code
A bar code representing alphanumeric characters with vertical lines (bars) of
different widths. Bar code with up to 20 characters, a 2-character start symbol and
a 2-character end symbol can be read.
■ CODE39 code
A bar code representing alphanumeric characters and symbols with vertical lines
(bars) of different widths. Bar code with up to 20 characters, a 2-character start
symbol and a 2-character end symbol can be read.
◆
Scanning codes
1
m
[LifeKit]
1
After Bar code reader starts, camera automatically switches to Macro shooting
and zoom becomes ON. Hold out-camera approximately 7-10 cm away from the
code to scan.
･
During Bar code reader stand-by, the operations below are available.
u
: Zoom ON
d
: Zoom OFF
#
: Switching Macro shooting OFF/ON ( )
g
,
n
: Switching Auto focus
･
Depending on the states, the auto focus icon changes as shown below.
(black) : Adjusting focus (green)/ (red) : Focus succeeded/failed
･
Switch to Macro OFF before scanning large size codes. The readability of
code may be raised by setting zoom OFF.
･
During Bar code reader stand-by, press
m2
→
1
-
3
to adjust flicker.
Adjusting flicker
→
P191
Example of JAN code
Information to be scanned
"4942857315721"
Example of NW7 code
Information to be scanned
"A123456789012A"
Example of CODE39 code
Information to be scanned
" ＊ 123456ABC ＊ "
Example of QR code
Information to be scanned
" 株式会社NTTドコモ (NTT DOCOMO, INC.)"