Docomo Style F-02A, Instruction Manual

Page: 53 / 469

51
Voice/Videophone Calls
- Make call from i-mode web page : You are not making videophone call after connecting to site
provided by IP (Information Provider)
- Upper limit exceeded. Connection failed. : Upper limit of a charging plan with a limiting
function (Type Limit or Family Wide Limit) is exceeded
･
If a videophone call accompanied with Chaku-moji is made when Auto redial as voice
in Operation is set to "ON", Chaku-moji accompanies when redialing.
･
Any videophone call from FOMA terminal to emergency call (110, 119 or 118) with Auto
redial as voice in Operation set to "ON" is automatically switched to a voice call.
◆ On hold
･
The caller is charged for time spent on hold.
1
During a call,
g
The call is put on hold, light blinks in green, and a melody is played. For a
videophone call, the videophone on-hold image is displayed on the phone of
the other party and yourself.
･
To clear voice call on hold, press
g
or
n
.
･
To clear videophone call on hold, perform any of the operations below.
g
: Redisplay the image sent before the call is put on hold
I
/
n
: Camera image is sent
a
: Substitute image is sent
◆ Using speakerphone function
1
Enter a phone number
e n
(1 sec. or more) or
C
appears at the top of the display.
･
For operating from phonebook, Redial, Received calls, Recorded messages or
Voice memos, press
n
(1sec. or more) or
I
.
･
Press
C
for 1 second or more to use speakerphone while Speakerphone in
Operation is set to "OFF".
･
While making a call, ringing or talking on the phone, you can switch the
speakerphone function ON/OFF each time you press
n
.
✔
INFORMATION
･
If you switch to speakerphone, the volume may suddenly increase. Use it with FOMA
terminal away from your ears.
･
Talk to FOMA terminal within approximately 50 cm. If a call is hard to hear from the
speaker due to loud noise around you or the other party, turn the speakerphone
function OFF.
･
This function can be used in Silent mode.
◆
Adjusting Listen volume during a call
･
This setting applies to Listen volume in Adjust volume.
1
During a voice call,
j
or
SD
◆
Using Voice clear/Voice slowing
❖
Switching Voice clear ON/OFF
This function automatically adjusts other party's voice to an appropriate volume by
voice range according to surrounding noise during a voice call, and allows you to
hear their voices clearly. And, the volume is automatically increased also when your
or other party's voice is low.
･
This function is not available when speakerphone is in use.
･
The settings are retained after a call.
･
This function is not for adjusting Listen volume. Change the volume of the other
party's voice with Listen volume.
1
During a voice call,
m7
When setting to "ON", appears. When this does not operate with
ON, it is displayed in gray.
❖
Switching Voice slowing ON/OFF
During a voice call, adjust the other party's voice to be heard slowly by using the
silence at intervals, to make it easier to be heard. When the other party speaks
without intervals, the voice is heard at the normal speed.
･
If you set Voice slowing to ON, the quality of the other party's voice, music or time
tone may change. In this case, set Voice slowing to OFF.
･
The settings are canceled after a call.
1
During a call,
a
When setting to "ON", appears. When this does not operate with
ON, it is displayed in gray.