Docomo Style F-02A, Instruction Manual

Page: 49 / 469

47
Before Using the Handset
❖
Checking Welcome mail
" オススメ (Recommended) BEST ", " 緊急速報「エリアメール」のご案内
(Early warning "Area Mail" information)", "Welcome デコメアニメ (Decome-
Anime) " mail are saved by default. appears on the stand-by display, and
when FOMA terminal is folded, the light (blinking) notifies you of unread mail.
1
g e g
The next procedures
→
P130 Step 2 and the following steps in "Displaying mail
in Inbox/Outbox/Unsent messages"
✔
INFORMATION
･
When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication succeeds, the stand-by display appears. If an incorrect terminal
security code is entered 5 times consecutively, the power is turned OFF (it can be turned
ON again).
･
When no operation is performed with FOMA terminal open for approximately 5
minutes (approximately 1 minute when power saving mode is "ON"), the display light
automatically turns off (power saving). It also applies during a voice call. The display
light turns on again if there is any operation or incoming call.
Select language
Changing screen display to English
You can select language from Japanese or English (Select language).
1
m
[Settings & NW services]
273 e 1
or
2
✔
INFORMATION
･
This setting is also saved to UIM.
･
Even if setting to "English", the displayed menu is not switched to English in some
Kisekae Tool. Note that, when Kisekae Tool in "Preinstalled" folder is set, a menu
dedicated to "English" is displayed.
･
Even if changing this setting, the title of Shortcut icon is not changed from the language
set when the shortcut icon was pasted.
Date & time
Setting date and time
You can set so that the time or time difference is automatically corrected or directly
enter the date and time. With automatic correction set, the time is corrected when
receiving the time information from DOCOMO's network in Japan or the time
difference correction information from the telecommunications carrier used
overseas.
1
m
[Settings & NW services]
711 e
Set required
items
e C
Auto time adjust : Set whether time is corrected automatically.
･
When "ON", Offset can be set.
･
When "OFF", set the date and time. Time zone and Summer time may also be
set.
Offset : When "+", the displayed time is always set forward the specified period
of time from the corrected time. When "-", the displayed time is always set
back the specified period of time from the corrected time.
Date : The date can be entered up between January 1, 2000 and December 31,
2050.
Time : Enter the time in the 24-hour format.
Time zone : When moving to a place with time difference, set the time zone
without changing the date and time settings.
･
Time difference from the previously set time zone is calculated and displayed.
･
Set "GMT+09:00" in Japan.
Summer time : When "ON", the displayed time is set forward one hour from the
specified time.
✔
INFORMATION
<When setting Auto time adjust to "ON">
･
Time or time difference is corrected when FOMA terminal is turned ON. If not corrected
for a while after turning FOMA terminal ON, once turn FOMA terminal OFF and then
turn it ON again. Note that, when no UIM is installed or in some radio wave conditions,
time is not corrected even if FOMA terminal is once turned OFF and turned ON again.
･
When time difference is corrected, a message indicating it appears.
･
After time or time difference is corrected overseas, the time displayed for call histories
and sent mails is local time.
･
Time difference is not corrected in some networks overseas.
･
The corrected time or time difference may have an error of several seconds.