Basic O
per
ation
Charging
For the charging time and continuous talk time, refer to "Main specifications" (
→
p.97).
・
The battery pack, AC adapter and provided desktop holder are not waterproof/
dustproof. Never charge the battery with the FOMA terminal left wet.
・
It is recommended that the desktop holder be used for charging to prevent water
from seeping in through the external connector terminal.
Charging using desktop holder
❶
Plug the connector of the AC adapter (optional) horizontally to the
terminal on the back of the provided desktop holder
Plug
Desktop Holder N32
FOMA AC Adapter 01/02
With the arrow
side facing up
Charge
lamp
Connector
100V AC
power outlet
❶
❷
❸
❷
Plug the AC adapter into the outlet
❸
Holding the desktop holder, insert the FOMA terminal
in direction
①
, then attach firmly in direction
②
・
Take care not to pinch the strap, etc. when attaching it.
・
The charge lamp lights up when charging starts. The charge
lamp turns off when charging ends (fully charged).
❹
After charging is complete, hold down the desktop
holder, then remove the FOMA terminal in reverse
procedure of attaching
Charging using AC adapter
❶
Open the external connector terminal cap of the FOMA terminal
(
→
p.18), then plug the AC adapter connector horizontally
into the FOMA terminal's external connector terminal
100V AC
power outlet
Plug
Release
buttons With the arrow
side facing up
Connector
cap
Connector
Charge lamp
FOMA
AC Adapter
01/02
❶
❷
❷
Plug the AC adapter into the outlet
❸
When charging is complete, remove the AC adapter
connector horizontally from the FOMA terminal while
pressing the release buttons, then unplug the AC
adapter from the outlet
・
Water might enter inside unless you securely close the external
connector terminal cap after charging is completed.
→
p.18
23
Summary of Contents for Prime N-03C
Page 164: ...Kuten Code List...
