Intr
oduc
tion
19
■
Attaching
❶
Insert the tab on top of the back cover
into the FOMA terminal slot, slide it in
direction
①
and push it down securely
in direction
②
The back cover cannot be attached if
the lock knob is turned to "LOCK".
Slot
Tab
Securely push the areas illustrated by and
make sure that there is no space between the
back cover and the FOMA terminal.
❷
Insert the provided lock driver into
the slot in the lock knob, and turn to
"LOCK" to lock
Lock knob
Lock driver
・
When removing the back cover, make sure that you drain water and wipe moisture off the FOMA terminal.
・
When attaching the back cover, make sure that no dust or dirt adheres to the back cover (especially to the rubber packing).
・
Water might enter the inside of the FOMA terminal unless you attach the back cover securely and lock it.
・
When attaching the back cover, make sure that the UIM, the microSD card and the battery pack are attached
securely. If the UIM or microSD card is not securely inserted, the battery pack sits on the UIM or microSD card which
causes a gap between the FOMA terminal and the back cover when attaching the back cover. The waterproof/
dustproof function might deteriorate because of the gap.
To maintain waterproof/dustproof function, replacement of parts is required once
every 2 years regardless of whether the FOMA terminal appears normal or abnormal.
DOCOMO replaces the parts as a chargeable service. Bring the FOMA terminal to a
repair counter specified by DOCOMO.
Summary of Contents for Prime N-03C
Page 164: ...Kuten Code List...